Baffles (pg 4)

 

 

RV6A Home
Up
Flight Adventures!
Flight Testing
First Flight!
WA to CA move
Finishing Stages
Firewall Forward
Panel & Electrical
Fuselage
Wings
Empennage
RV-6A Paint Job
2013 Pictures

 

 

 

 

 

Aviation Links:

Van's Aircraft

Van'sAirforce.net

AirNav.com

AeroSportPower

Dynon Avionics

AeroElectric

Connection

Stark Avionics

 

 

RV-6A Home Finishing Stages Firewall Forward Fuselage Panel & Electrical Wings Empennage

 

Back Next

Baffles:   pg 1   |  pg 2  |  pg 3  |  pg 4

 

This page shows some pictures of the baffles painted and installed.  Still need to seal the gaps with high-temp RTV at this point, but the baffles are nearly ready to fly.  The masking tape on the corners is a temporary hold down; I'm told the air seal material will take a "set" after a few hours of flight and I'm not sure I want to permanently sew the corner overlaps together.

Left side and aft area shown here with oil cooler installed:

 

Front view of left side:

 

Front view of right side:

 

Right side view:

 

Aft, right side view with ignition harness work in progress:

 

 

Baffles:   pg 1   |  pg 2  |  pg 3  |  pg 4

Back Next
 
 

  This page was last updated on 12/18/11.

 

Click here for questions or feedback. 

Copyright 2007.  All rights reserved.  Chris Hand, chris@ckhand.com