Engine & Sys (pg 3)

 

 

RV6A Home
Up
Flight Adventures!
Flight Testing
First Flight!
WA to CA move
Finishing Stages
Firewall Forward
Panel & Electrical
Fuselage
Wings
Empennage
RV-6A Paint Job
2013 Pictures

 

 

 

 

 

Aviation Links:

Van's Aircraft

Van'sAirforce.net

AirNav.com

AeroSportPower

Dynon Avionics

AeroElectric

Connection

Stark Avionics

 

 

RV-6A Home Finishing Stages Firewall Forward Fuselage Panel & Electrical Wings Empennage

 

Back Next

Engine & Sys:  pg 1 | pg 2 | pg 3 | pg 4 | pg 5

 

This page shows some pictures of the Vetterman's exhaust pipe suspension system installed on my RV-6A.  The nose gear assembly on the engine mount for the -6A complicates the cross-over support in this area compared to installing the same thing on a RV-6.  I couldn't get that horizontal piece to run straight across without being VERY close to the pipe the nose gear leg is bolted into.  You can see that in these photos.  I'll put something between the rubber hose and the gear leg before flying and then see how it looks after a few flying hours.  Might have to make some adjustments during flight testing:

 

 

Engine & Sys:  pg 1 | pg 2 | pg 3 | pg 4 | pg 5

Back Next
 
 

  This page was last updated on 12/18/11.

 

Click here for questions or feedback. 

Copyright 2007.  All rights reserved.  Chris Hand, chris@ckhand.com